Seminal
The magazine and atlas of EU-funded researchA new publication from the web and AI team at Scott Charnley

Atlas / Austria

Research and Innovation Action · Running

CENTREPIECE sCalablE iNnovaTive pRocessEs for the ProductIon of fuEl CElls

Coordinator
Hycenta Research GmbH, Austria
Runs
1 January 2026 to 31 December 2028
Status
Running
EU funding
€5.0m
Total cost
—
Partners
7 organisations in 4 countries
Type
Research and Innovation Action
Grant agreement
101251185

What the project is doing

In the project's own words, from its summary on CORDIS.

PEMFCs are expected to increase their share of the transport market over the next years, but to do so MEA manufacturing processes and technologies must become more reliable, efficient and faster to allow lower cost. Therefore, it is key to implement advanced manufacturing techniques for catalyst coated components, which will enable lower raw materials consumption, lesser cost and reduced waste by applying innovative printing and coating techniques.

Although low-volume batch processes have transitioned to roll-to-roll production lines, there is still a need for higher line speeds and yields, since the main materials are all relatively expensive (membrane, ionomer, PGM-based catalysts). In addition, conventional CCMs usually do not allow an easy recyclability, therefore generating the need of new industrial processes. CENTREPIECE will, 1) upscale and validate with up-to-date CCM materials using innovative coating techniques developed in previous projects, with the objective of making them suitable for large-scale production [TRL6] 2) Develop and validate In-line Quality Control techniques against ex-situ and off-line data [TRL6] 3) integrate project developments into a prototype pilot line capable of 2400 m2/year at a line speed >10m/min [MRL5] 4) Revolutionary digital coating and laser drying technology will also be assessed.

MEAs will be manufactured full size (280 cm2 active area) and benchmarked against conventionally manufactured, showcasing the ability of the line to meet industrial needs, whilst decreasing the scrap-rate below 5% and increasing the yield to >90%.CENTREPIECE will build on the developments from previous projects (MAMA-MEA, CAMELOT, VOLUMETRIQ, INSPIRE, IMMORTAL, HIGHLANDER, etc.). Innovative techniques, together with in-line QC processes will allow high speed manufacturing and will therefore provide the necessary capacity to meet forecasted demand.

Who is involved

OrganisationCityCountryRole
Hycenta Research GmbHGrazAustriaCoordinator
Albert-Ludwigs-Universitaet FreiburgFreiburgGermanyParticipant
Fraunhofer Gesellschaft Zur Forderung Der Angewandten Forschung eVMunchenGermanyParticipant
Technische Universitaet ChemnitzChemnitzGermanyParticipant
Sfice Innovative Minds Sociedad LimitadaZ61814SpainParticipant
Johnson Matthey Hydrogen Technologies LimitedRoystonUnited KingdomParticipant
Johnson Matthey plcRoystonUnited KingdomThird party

Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI