Seminal
The magazine and atlas of EU-funded researchA new publication from the web and AI team at Scott Charnley

Atlas / France

Innovation Action · Running

DC-POWER Direct Current – Power flOws in megawatt-scale Energy gRids

Coordinator
Commissariat a L Energie Atomique Et Aux Energies Alternatives, France
Runs
1 January 2024 to 31 December 2027
Status
Running
EU funding
€7.1m
Total cost
€8.5m
Partners
12 organisations in 7 countries
Type
Innovation Action
Grant agreement
101135828

What the project is doing

In the project's own words, from its summary on CORDIS.

The current electric energy distribution grid—based mainly on alternating current (AC)—has servedus for over a century. Transporting energy generated at large power stations over long distances to a distributed network of consumers. It is starting to show its shortcomings due to a rise in localgeneration with renewable energy sources and the essentially direct current (DC) nature of manymodern electric loads. Modern grids need to deal with two-way energy flows, local intermittent generation fromrenewables and local energy storage in stationary batteries.

Medium voltage distribution microgridsusing DC instead of AC hold the promise to address the shortcomings of the AC main grid. There are several initiatives in low voltage secondary distribution grids, and DC-POWER is expandingtheir concepts into the medium voltage range. We propose the D3Bus, a bipolar DC bus operating at ±1.5 kV. Compared to standard 3-phase 400V AC distribution the D3Bus can reduce distributionenergy losses by over 90%, reduce downtime, equipment cost, and space requirements whileincreasing sustainability.

DC-POWER demonstrates, tests and validates the D3 Bus concept in two operational pilots: Onepowering an industrial-scale hydrogen electrolyser stack at 2 MW power, and one powering a newdata centre with up to 500 kW installed IT power. Both pilots include sizeable solar PV arrays (200kW), while the data centre also includes a directly coupled DC UPS solution. In order to realise these pilots, DC-POWER develops several DC-DC converters, an AC activefrontend, as well as system protection components and a power/energy management system.

The D3Bus is intended as a first stepping-stone towards standardization of MVDC distributionmicrogrids. It is such industry-wide standards that will enable and accelerate the adaptation of the electricity distribution system towards the energy demands of the future and net zero.

Topics

Who is involved

OrganisationCityCountryRole
Commissariat a L Energie Atomique Et Aux Energies AlternativesParisFranceCoordinator
Secheron SASatignySwitzerlandAssociatedpartner
Aeg Power Solutions GmbHWarstein BeleckeGermanyParticipant
Mcphy Energy Deutschland GmbHWildauGermanyParticipant
Technische Hochschule Ostwestfalen-LippeLemgoGermanyParticipant
Wirtschaft Und Infrastruktur GmbH & Co Planungs KgMuenchenGermanyParticipant
Synapsecom Anonymi Etaireia Parochis Tilepikoinoniakon Ypiresion Kai Ypiresion InternetAthensGreeceParticipant
Enfasys Ingenieria SLGijonSpainParticipant
ArcelChampagne-au-Mont-d'OrFranceParticipant
Tech Power ElectronicsCourlaouxFranceParticipant
Mcphy Energy Italia Societa a Responsabilita LimitataSan MiniatoItalyThird party
Institut Jozef StefanLjubljanaSloveniaParticipant

Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI