Seminal
The magazine and atlas of EU-funded researchA new publication from the web and AI team at Scott Charnley

Atlas / Austria

Research and Innovation Action · Running

EM-TECH Innovative e-motor technologies covering e-axles and e-corners vehicle architectures for high-efficient and sustainable e-mobility

Coordinator
Avl List GmbH, Austria
Runs
1 January 2023 to 31 December 2025
Status
Running
EU funding
€3.8m
Total cost
€3.8m
Partners
11 organisations in 6 countries
Type
Research and Innovation Action
Grant agreement
101096083

What the project is doing

In the project's own words, from its summary on CORDIS.

EM-TECH brings together 10 participants from industry and academia to develop novel solutions to push the boundaries of electric machine technology for automotive traction, through: i) innovative direct and active cooling designs; ii) virtual sensing functionalities for the high-fidelity real-time estimation of the operating condition of the machine; iii) enhanced machine control, bringing reduced design and operating conservativeness enabled by ii); iv) electric gearing to provide enhanced operational flexibility and energy efficiency; v) digital twin based optimisation, embedding systematic consideration of Life Cycle Analysis and Life Cycle Costing aspects since the early design stages; and vi) adoption of recycled permanent magnets and circularity solutions.

The proposed innovations will be implemented in new series of radial flux direct drive in-wheel motors characterised by so far unexplored levels of torque density (>150 Nm/litre, >50 Nm/kg), and on-board single stator double rotor type ironless axial flux machines providing power density and specific power levels in excess of 30 kW/litre and 10 kW/kg. The solutions will address both passenger car and van applications (continuous power levels of 50 kW - 120 kW), providing competitive costs (<6 Euro/kg for a production of 100000 units/year), and leading to significant reduction of motor energy loss during real vehicle operation (>25%), and to >60% decrease of the rare earth content, including implementation of magnet recycling solutions.

EM-TECH obtained the support of several car makers (AUDI and Changan UK), which will strengthen the exploitation strategy. EM-TECH will further directly contribute to the relevant European Destination and KSO C and A, by supporting the establishment of a European leadership in the sector of key digital, enabling and emerging technologies, and the development of the respective value chains.

Topics

Who is involved

OrganisationCityCountryRole
Avl List GmbHGrazAustriaCoordinator
Armengaud Innovate GmbHTobelbadAustriaParticipant
Mettop GmbHLeobenAustriaParticipant
Traxial BVKortrijkBelgiumParticipant
Technische Universitaet IlmenauIlmenauGermanyParticipant
Vaionic Technologies GmbHBerlinGermanyParticipant
Ideas & Motion SRLAlbaItalyParticipant
Politecnico Di TorinoTorinoItalyParticipant
Elaphe Pogonske Tehnologije DooLjubljanaSloveniaParticipant
University of BathBathUnited KingdomAssociatedpartner
University of SurreyGuildfordUnited KingdomAssociatedpartner

Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI