- Coordinator
- Ait Austrian Institute of Technology GmbH, Austria
- Runs
- 1 September 2022 to 30 April 2027
- Status
- Running
- EU funding
- €8.0m
- Total cost
- €8.0m
- Partners
- 17 organisations in 8 countries
- Type
- Research and Innovation Action
- Grant agreement
- 101069508
What the project is doing
In the project's own words, from its summary on CORDIS.
HighSpin aims to develop high-performing, safe and sustainable generation 3b high-voltage spinel LNMO||Si/C material, cells and modules with a short industrialisation pathway and demonstrate their application for automotive and aeronautic transport applications. The project addresses in full the scope of the HORIZON-CL5-2021-D2-01-02 topic, setting its activities in the “high-voltage” line. The project objectives are:•Further develop the LNMO||Si/C cell chemistry compared to the reference 3beLiEVe baseline, extracting its maximum performance.•Develop and manufacture LNMO||Si/C cells fit for automotive and aeronautic applications.•Design and demonstrate battery modules for automotive and aeronautic applications.•Thoroughly assess the LMNO||Si/C HighSpin technology vs. performance, recyclability, cost and TRL.
The HighSpin cell delivers 390 Wh/kg and 925 Wh/l target energy density, 790 W/kg and 1,850 W/l target power density (at 2C), 2,000 deep cycles, and 90 €/kWh target cost (pack-level). The project activities encompass stabilisation of the active materials via microstructure optimisation, the development of high-voltage electrolyte formulations containing LiPF6 and LIFSI, high-speed laser-structuring of the electrodes, and the inclusion of operando sensors in the form of a chip-based Cell Management Unit (CMU).
HighSpin will demonstrate TRL 6 at the battery module level, with a module-to-cell gravimetric energy density ratio of 85-to-90% (depending on the application). Recyclability is demonstrated, targeting 90% recycling efficiency at 99.9% purity. HighSpin aims at approaching the market as a second-step generation 3b LNMO||Si/C in the year 2028 (automotive) and 2030 (aeronautics), delivering above 40 GWh/year and 4 billion/year sales volume in the reference year 2030.
Topics
Who is involved
| Organisation | City | Country | Role |
|---|---|---|---|
| Ait Austrian Institute of Technology GmbH | Wien | Austria | Coordinator |
| Customcells Holding GmbH | Itzehoe | Germany | Participant |
| Customcells Itzehoe GmbH | Itzehoe | Germany | Participant |
| Forschungszentrum Julich GmbH | Julich | Germany | Participant |
| Karlsruher Institut Fuer Technologie | Karlsruhe | Germany | Participant |
| Talga Advanced Materials GmbH | Rudolstadt | Germany | Participant |
| Topsoe AS | Kongens Lyngby | Denmark | Participant |
| Topsoe Battery Materials A/s | Kongens Lyngby | Denmark | Participant |
| Centro De Investigacion Cooperativa De Energias Alternativas Fundacion, Cic Energigune Fundazioa | Minano Alava | Spain | Participant |
| Arkema France SA | Puteaux, La Defense | France | Participant |
| Coatex SAS | Genay | France | Third party |
| Commissariat a L Energie Atomique Et Aux Energies Alternatives | Paris | France | Participant |
| Saft | Levallois-Perret | France | Participant |
| Lead Tech SRL | Casalnuovo Di Napoli Na | Italy | Participant |
| Sensichips SRL | Aprilia | Italy | Participant |
| Vianode AS | Oslo | Norway | Participant |
| Pipistrel Vertical Solutions Doo Podjetje Za Napredne Letalske Resitve | Ajdovscina | Slovenia | Participant |
Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI