Seminal
The magazine and atlas of EU-funded researchA new publication from the web and AI team at Scott Charnley

Atlas / Germany

Innovation Action · Running

HOLISTEP Sub-wavelength Holographic Lithography Stepper for Integrated Circuit Production

Coordinator
Fraunhofer Gesellschaft Zur Forderung Der Angewandten Forschung eV, Germany
Runs
1 January 2024 to 31 December 2027
Status
Running
EU funding
€3.5m
Total cost
—
Partners
10 organisations in 6 countries
Type
Innovation Action
Grant agreement
101137624

What the project is doing

In the project's own words, from its summary on CORDIS.

To achieve ever shrinking dimensions and higher resolutions of circuit elements, projection lithography (PL), is growing in complexity and cost to manufacturers. It is limited to producing 2D images on flat surfaces. Extension to 3D imaging is restricted by trade-off between focus depth and resolution. Advanced, cost-efficient solutions to fabricate wafer-scale 3D components are required. HoLiSTEP unleashes the potential of sub-wavelength Holographic Lithography (HL) as a powerful and enabling disruptive lithography.

HL will overcome limitations of PL and facilitate production of novel 3D topographies with high resolution while making the production of high-resolution IC much more affordable. An industrial prototype operating at 345nm with 200nm resolution will be produced and validated in an operational environment. Several advancements in holographic stepper subcomponents must be realised: A UV fibre-based laser with 20W output power at 345nm and 1.5m coherence length, an alignment system with 25nm overlay precision, an adaptive optical system with correction precision of 1/20λ and software modules for vector diffraction models.

Energy consumption of HL technology is drastically reduced compared to PL due to low power-consumption of the laser and production of complex structures in one exposure. HL images are not sensitive to mask defects, eliminating frequent mask replacements and use of toxic materials. Moreover, holographic masks act as projection optics, eliminating the need for complex optical systems. The HL prototype will be verified for 3D patterning for MEMS, MOEMS and micro-optical components to show better resolution, flexibility of 3D printing and reduced cost.

HoLiSTEP will empower a positive transformative effect on environment, economy and society by enabling a wider range of companies to produce novel high-resolution 2D and 3D images at lower costs.

Who is involved

OrganisationCityCountryRole
Fraunhofer Gesellschaft Zur Forderung Der Angewandten Forschung eVMunchenGermanyCoordinator
Mimotec SASionSwitzerlandAssociatedpartner
Swhl GmbHDuebendorfSwitzerlandAssociatedpartner
Capgemini Engineering Deutschland SAS & Co KgMunchenGermanyParticipant
Ampliconyx OyTampereFinlandParticipant
Ita-Suomen YliopistoKuopioFinlandParticipant
Tampereen Korkeakoulusaatio SrTampereFinlandParticipant
Ekspla UabVilniusLithuaniaParticipant
Flexible Optical BVDelftNetherlandsParticipant
Modus Research and Innovation LimitedDundeeUnited KingdomAssociatedpartner

Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI