Seminal
The magazine and atlas of EU-funded researchA new publication from the web and AI team at Scott Charnley

Atlas / Spain

Research and Innovation Action · Running

HyP3D Hydrogen Production in Pressurized 3D-Printed Solid Oxide Electrolysis Stacks

Coordinator
Fundacio Institut De Recerca En Energia De Catalunya, Spain
Runs
1 January 2023 to 31 December 2026
Status
Running
EU funding
€2.5m
Total cost
€2.5m
Partners
8 organisations in 4 countries
Type
Research and Innovation Action
Grant agreement
101101274

What the project is doing

In the project's own words, from its summary on CORDIS.

Reliable and stable operation under pressure is one of the major challenges of currently existing Solid Oxide Electrolysis (SOEL) technologies for its ultimate application in relevant sectors such as energy storage and transport. The main goal of HyP3D is to overcome this barrier by delivering disruptive ultra-compact and lightweight high-pressure SOEL stacks, able to convert electricity into compressed hydrogen, for gas grid injection (P2G) and on-site generation in Hydrogen Refueling Stations (HRS).

HyP3D stacks are based on innovative 3D-printed SOEL cells with unprecedented mechanical properties, embedded functionality and self-tightening capabilities implemented by design. These unique advantages will allow operation at pressures above five bars without the need of unpractical, energy inefficient and costly pressure vessels, which is the only actual solution for pressurization despite their low reliability. Breakthrough HyP3D geometries will multiply by more than three times the volume and mass specific power density of conventional technologies (reaching 3.40kW/L and 1.10 kW/kg, respectively), resulting in pressurized SOEC stacks with a remarkably reduced footprint (one third of state-of-the-art stacks) and ultra-low use of raw materials (76% reduction).

Moreover, the elimination of any vessel will increase the system efficiency, reduce the final cost and substantially simplify the scaling-up towards required MW-size systems. The project is product-driven and involves industrial partners with proved experience in mass manufacturing of ceramics by 3D printing, glass-to-metal sealing and assembly of electrolysers, which will ensure, together with the presence of P2G and HRS stakeholders, competently covering the entire value-chain.

HyP3D technology will be fabricated in a pilot line, which will ensure reaching stack level and validation at laboratory scale by 2025 (TRL=4).

Topics

Who is involved

OrganisationCityCountryRole
Fundacio Institut De Recerca En Energia De CatalunyaSant Adria De BesosSpainCoordinator
Danmarks Tekniske UniversitetKongens LyngbyDenmarkParticipant
Barcelona Supercomputing Center Centro Nacional De SupercomputacionBarcelonaSpainParticipant
H2b2 Electrolysis Technologies SLMadridSpainParticipant
Vac Tron SACanovellesSpainParticipant
SAS 3dceram SintoBonnac La CoteFranceParticipant
Politecnico Di TorinoTorinoItalyParticipant
Snam SpAMilanoItalyParticipant

Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI