- Coordinator
- Sintef AS, Norway
- Runs
- 1 September 2022 to 31 May 2026
- Status
- Running
- EU funding
- €6.8m
- Total cost
- €6.8m
- Partners
- 13 organisations in 7 countries
- Type
- Research and Innovation Action
- Grant agreement
- 101069765
What the project is doing
In the project's own words, from its summary on CORDIS.
The IntelLiGent project answers to the need for general public acceptance of EVs, by facilitating the industrial deployment of next-generation batteries allowing for an increased driving range, fast charging capabilities, low cost and increased safety. IntelLiGent will develop European generation 3b high voltage (>4.7 V) LIBs with increased energy density (>350-400 Wh/kg, 750-1000 Wh/l), charge acceptance (>2C) and cycle-life (>2000 deep cycles) compared to the state-of-the-art, while reducing cost (<100 €/kWh on pack level) and carbon footprint of the produced cells.
The ambitious goals will be realized through optimized cells produced with;- High-voltage spinel LNMO cathode materials engineered to enhance stability and enable aqueous processing whilst exploring strategies to increase specific capacity beyond the theoretical maximum of standard LNMO- Energy efficient high-capacity stable Si-Gr anodes delivering 850 mAh/g- High-voltage electrolytes with innovative additives that form protective layers on the anode and the cathode- Self-mitigating and healing binders and separators minimize parasitic reactions and degradation- Novel open-source modelling tools and high-throughput screening will be employed to accelerate the development of environmentally benign materials with minimized use of critical raw materials-Optimized electrode design (≥4.5 mAh/cm2) and cell design-based commercial-scale automotive cells (20 Ah) as well as battery modules (1 kWh) at TRL 6From an industrial viewpoint, a prerequisite for succeeding is continuity in battery R&D&I projects and training/education of required staff, which IntelLiGent will foster by broad dissemination and exploitation of the project results across the battery value chain.
The project will result in strengthening of the European battery value chain by developing European industries with leading-edge technologies on battery materials, and allowing for accelerated roll-out of electrification for mobility.
Topics
Who is involved
| Organisation | City | Country | Role |
|---|---|---|---|
| Sintef AS | Trondheim | Norway | Coordinator |
| Ait Austrian Institute of Technology GmbH | Wien | Austria | Participant |
| Eidgenossische Materialprufungs- Und Forschungsanstalt | Dubendorf | Switzerland | Associatedpartner |
| Customcells Holding GmbH | Itzehoe | Germany | Participant |
| Customcells Itzehoe GmbH | Itzehoe | Germany | Participant |
| E-Lyte Innovations GmbH | Kaiserslautern | Germany | Participant |
| Topsoe AS | Kongens Lyngby | Denmark | Participant |
| Topsoe Battery Materials A/s | Kongens Lyngby | Denmark | Participant |
| Fundacio Eurecat | Cerdanyola Del Valles (Barcelona) | Spain | Third party |
| Fundacio Institut De Recerca En Energia De Catalunya | Sant Adria De Besos | Spain | Participant |
| Millor Energy Solutions SL | Cerdanyola Del Vallès | Spain | Participant |
| Vianode AS | Oslo | Norway | Participant |
| The Chancellor, Masters and Scholars of the University of Oxford | Oxford | United Kingdom | Associatedpartner |
Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI