METAMORPHA Made-to-measure micromachining with laser beams tailored in amplitude and phase
- Coordinator
- Fraunhofer Gesellschaft Zur Forderung Der Angewandten Forschung eV, Germany
- Runs
- 1 September 2022 to 28 February 2027
- Status
- Running
- EU funding
- €7.0m
- Total cost
- €7.0m
- Partners
- 12 organisations in 7 countries
- Type
- Research and Innovation Action
- Grant agreement
- 101057457
What the project is doing
In the project's own words, from its summary on CORDIS.
The METAMORPHA concept is a single agile USP laser micromachining platform to replace many conventional manufacturing process chains. It has the potential to eliminate thousands of environmentally damaging production processes. METAMORPHA is all-electric, all-digital, produces no waste chemicals and enables novel processes for product rework and repair. All-in-one module: The key to this agility is a combination of two cascaded spatial light modulators (SLM) and a galvo scanner resulting in the most sophisticated beam shaping and steering ever developed.
This allows a single module to perform the job of several laser processing heads: e.g. polishing, milling, drilling and cutting (importantly including any wall angle). Made-to-measure laser processes: Each infeed component is scanned with a high resolution 3D sensor. A machine learning algorithm determines an individualised laser process to maximise efficiency and ensure ""first time right"".In-line process control: Data from additional online sensors are processed using an edge device running a self-learning algorithm to provide real-time feedback for system control.
The ultra-fast edge-based signal processing and synchronisation are key project topics. Agile and scalable: Suitable for any standard industrial production line including 2-, 3- or 5-axis, rotating and roll-to-roll, and for scale up to parallel processing with multiple modules. The three end use cases (UCs) show the versatility and scope for replacing existing process chains:UC-1 PHILIPS: Small complex metal parts (shaving heads) requiring 90 degree wall angles.
UC-2 TKSE: Large area embossing rollers and the re-writing of old rollers. UC-3 CERAT: Very hard carbide parts and refurbishment of worn parts. Sustainability assessment: A life cycle analysis (LCA) and social LCA will be carried out to quantify the environmental and socioeconomic benefits. A detailed plan for exploitation and an extensive dissemination and communication plan are in place.""
Topics
Who is involved
| Organisation | City | Country | Role |
|---|---|---|---|
| Fraunhofer Gesellschaft Zur Forderung Der Angewandten Forschung eV | Munchen | Germany | Coordinator |
| Laser Engineering Applications SA | Seraing | Belgium | Participant |
| Rheinisch-Westfaelische Technische Hochschule Aachen | Aachen | Germany | Participant |
| Thyssenkrupp Steel Europe AG | Duisburg | Germany | Participant |
| Vivid Components Germany UG | Paderborn | Germany | Participant |
| Idryma Technologias Kai Erevnas | Irakleio | Greece | Participant |
| Datapixel SL | Getxo | Spain | Participant |
| Fent Innovative Software Solutionssl | Valencia | Spain | Participant |
| Universitat Politecnica De Valencia | Valencia | Spain | Participant |
| Association Pour La Recherche Et Ledeveloppement D'innovations Et Detechnologies Pour La Protection Del'heritage Environnemental, Social | Nice | France | Participant |
| Ceratizit Luxembourg SARL | Mamer | Luxembourg | Participant |
| Philips Consumer Lifestyle BV | Eindhoven | Netherlands | Participant |
Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI