Seminal
The magazine and atlas of EU-funded researchA new publication from the web and AI team at Scott Charnley

Atlas / Belgium

Research and Innovation Action · Running

MOWSES Multi-faceted Assessment and Optimization of Welded Structural Green Steel Plates for Use in European Sustainable Infrastructure

Coordinator
Onderzoekscentrum Voor Aanwending Van Staal NV, Belgium
Runs
1 October 2024 to 30 September 2028
Status
Running
EU funding
€4.6m
Total cost
€4.6m
Partners
8 organisations in 4 countries
Type
Research and Innovation Action
Grant agreement
101178524

What the project is doing

In the project's own words, from its summary on CORDIS.

The main objective of the WeldGreenPlate proposal is to define the conditions for safe use of green structural steels, if possible without the use of critical strategic elements, for European infrastructures made of medium strength (S355) to ultra-high strength (S960) steels. To achieve this goal, the most critical locations in these structures will be investigated: the welded joints and in particular the HAZ. Future green steels will be manufactured using an increased amount of scrap, likely of lower quality and containing higher concentrations of residual elements (Cu, Ni, Cr, Mo, Sn, As, Sb, Pb, Zn, Bi and Co).

This will modify the chemical composition of the steel grades and thus the response of the material to thermal cycles, such as imposed by welding. The properties of welded joints will therefore be changed, making it necessary to assess these changes and remedy them, if required. The proposal will investigate modified alloying concepts for the safe application of clean steel in downstream processing and fabrication. It is planned to investigate the application of multiple welding repairs to allow re-use of fabricated components and give the opportunity to have steel solutions with improved CO2 emissions through re-use of fabricated components.

The improved or non-degraded weldability will allow to develop new clean steel grades with improved in-use properties, particularly strength and toughness in the welded conditions, through application of state-of-the-art techniques: machine learning, thermodynamic simulations, FEM of microstructural behaviour, supported by advanced analytical techniques. The latest items are innovative tools that will be available to future clean steel grades development.

It is in the scope of the project to find the requirements for high-performance structure steels characterized by increased tolerance to contaminants in the scrap, in particular Cu.

Topics

Who is involved

OrganisationCityCountryRole
Onderzoekscentrum Voor Aanwending Van Staal NVZelzateBelgiumCoordinator
Universiteit GentGentBelgiumParticipant
Comtes Fht ASDobřanyCzechiaParticipant
Aktien-Gesellschaft Der Dillinger HuttenwerkeDillingenGermanyParticipant
Eurice European Research and Project Office GmbHSt IngbertGermanyParticipant
Rheinisch-Westfaelische Technische Hochschule AachenAachenGermanyParticipant
Universitat Des SaarlandesSaarbruckenGermanyParticipant
Technische Universiteit DelftDelftNetherlandsParticipant

Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI