Seminal
The magazine and atlas of EU-funded researchA new publication from the web and AI team at Scott Charnley

Atlas / Spain

European Research Council grant · Running

MULTIMETALBAT Multi-metal anode: Towards safe and energy dense batteries

Coordinator
Agencia Estatal Consejo Superior De Investigaciones Cientificas, Spain
Runs
1 June 2023 to 31 May 2028
Status
Running
EU funding
€1.9m
Total cost
€1.9m
Partners
1 organisations in 1 countries
Type
European Research Council grant
Grant agreement
101089281

What the project is doing

In the project's own words, from its summary on CORDIS.

Li metal is considered to be the holy grail anode material due to its high specific capacity and low standard redox potential and could, in theory, lead to the assembly of extremely high energy density cells. Metal anode based batteries, in general, represent the main viable option towards a leapfrog in terms of energy density when compared with current Li-ion technology, thus motivating important research efforts in Li-air, Li-Sulfur and, more recently, solid state batteries (SSB).

Unfortunately, all of these technologies (even SSB) suffer from dendritic Li growth, eventually resulting in short circuit/thermal runaway. Requirements for smooth Li metal electrodeposition, mostly consist in the fine control of the cation mass transport through the solid electrolyte interphase (SEI), which in turn is governed by the composition, morphology and stability of the latter. Unfortunately, and after several decades of investigation, it is virtually impossible to achieve the perfect interphase/interface which can sustain thousands of cycles in real battery operation conditions.

The main objective of MULTIMETALBAT is to bring a new paradigm for metal anode by developing electrolytes containing a mixture of multiple cations (Li+, Na+, K+, Ca2+ or Mg2+) which will modify the overall thermodynamics of plating and stripping when compared with conventional single metal anode. Kinetic competition between various electrodeposition processes will be promoted and the SEI will be engineered to sustain high mechanical, chemical and thermal stability, hence helping promoting homogeneous cation diffusion through it.

Targeted figures of merit include: i) critical current density for 3D metal growth above 10 mA.cm-2 and ii) 350 Wh/kg energy density for 100 mAh pouch cells, almost doubling that of current Li-ion. Yet, the main objective of MULTIMETALBAT will be increased safety and extensive standard safety measurements will be performed on prototype cells and compared with Li-ion batteries.

Topics

Who is involved

OrganisationCityCountryRole
Agencia Estatal Consejo Superior De Investigaciones CientificasMadridSpainCoordinator

Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI