Seminal
The magazine and atlas of EU-funded researchA new publication from the web and AI team at Scott Charnley

Atlas / Austria

Innovation Action · Running

MULTIMOLD Multi-functional In-Mold Electronics

Coordinator
Joanneum Research Forschungsgesellschaft Mbh, Austria
Runs
1 January 2024 to 31 December 2027
Status
Running
EU funding
€5.8m
Total cost
—
Partners
13 organisations in 6 countries
Type
Innovation Action
Grant agreement
101138427

What the project is doing

In the project's own words, from its summary on CORDIS.

Film insert molding and in-mold decoration are standard processes in injection molding allowing to generate 3D shaped objects with seamlessly integrated graphics and high freedom in design. With the emerging functional printing of circuits and sensors, the field of in-mold electronics has extremely expanded covering several applications (i.e., Human Machine Interface in automotive and industries, condition monitoring and sensors in energy generation field, healthcare, etc.).

The entire manufacturing process for in-mold electronics includes several sub-processes, most of which have a high yield of ~ 99%. However, the yield for overmolding, which is crucial for the production of complex products, is 85% at best, resulting in an overall yield that is far too low and requires high tooling and process optimization costs. Since nowadays in-mold electronic products are multi-material compounds that are difficult to recycle they do not meet the requirements of European society and policy on sustainability and circularity.

The currently used capacitive sensors are not usable with cold fingers or gloves and do not provide haptic feedback, thus leading to an unsatisfactory user experience. Moreover, the direct lightning by LEDs placed in the vicinity of capacitive sensors generates a substantial heat inside the injection-molded part, leading to low durability and bad user experience in the Human Machine Interface. To overcome these limitations the objective of the MULTIMOLD project is to develop the next generation manufacturing process for products with complex geometries based on in-mold electronics with a robust, weather-resistant material concept that provides inherent recyclability by design.

The MULTIMOLD complex products will combine advanced electronic functionality, multimodal sensors, haptic feedback, and power supply with micro- and nanostructured functional surfaces that may be light guiding, anti-bacterial, anti-icing, easy-to-clean and have appealing textures.

Topics

Who is involved

OrganisationCityCountryRole
Joanneum Research Forschungsgesellschaft MbhGrazAustriaCoordinator
Eologix Sensor Technology FlexcoGrazAustriaParticipant
Htp High Tech Plastics GmbHFohnsdorfAustriaParticipant
Montanuniversitaet LeobenLeobenAustriaParticipant
Nanogate Central and Eastern Europepe GmbHFohnsdorfAustriaParticipant
Interuniversitair Micro-Electronica CentrumLeuvenBelgiumParticipant
Fraunhofer Gesellschaft Zur Forderung Der Angewandten Forschung eVMunchenGermanyParticipant
Schneider Electric Industries SASRueil MalmaisonFranceParticipant
R2m Solution SRLPaviaItalyParticipant
Standex Engraving ItalyMilanoItalyParticipant
Standex Engraving ItalyMilanoItalyThird party
Standex International SRLMilanoItalyParticipant
Syxis VsiVilniusLithuaniaParticipant

Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI