Seminal
The magazine and atlas of EU-funded researchA new publication from the web and AI team at Scott Charnley

Atlas / Netherlands

European Research Council grant · Running

Scalable IMPACT Robust and Scalable Catalytic Ball Milling for Plastic Recycling (Scalable IMPACT)

Coordinator
Universiteit Utrecht, Netherlands
Runs
1 March 2027 to 31 August 2028
Status
Running
EU funding
€150k
Total cost
—
Partners
1 organisations in 1 countries
Type
European Research Council grant
Grant agreement
101335456

What the project is doing

In the project's own words, from its summary on CORDIS.

Polyolefins such as polyethylene and polypropylene make up more than 50% of global polymer production and are thus a major contributor to waste accumulation in the environment. Classical recycling via melting and reshaping usually leads to a lower quality product. Chemical recycling is proposed as solution, in which the chemical bonds of the polymer are broken to obtain chemical building blocks. It is most desired to produce monomers to make high quality polymers again.

However, for polyolefins the state-of-the-art pyrolysis requires high temperatures and only produces a mixed product oil, which can be used as refinery input but not to make polymers directly. In my ERC StG project IMPACT, I investigate the fundamental mechanism of polyolefin conversion directly to its monomers. I showed that my novel surface activated mechano-catalyst can steer the radical depolymerization pathway to monomers below 50 ˚C in a ball mill reactor.

This produces less than 30 different chemical species in contrast to the hundreds of different species obtained with pyrolysis. The current results are obtained with pure polymers at the gram-scale and in batch operation. Industrial tonne-scale ball mills exist, e.g., in the cement industry for grinding. However, these are rotary ball mills in contrast to our lab-based shaker geometry. In this project, I will build on the results of my ERC StG and demonstrate this technology using realistic plastic waste, at the kg-scale, using a rotary ball mill and develop continuous operation.

In addition, a relationship between milling parameters and production rate will be developed to predict energy requirements and thus commercial viability, scalability and sustainability of the process. Product purification and reuse to make new polymers will also be demonstrated. Together with my existing patents on the surface activated mechano-catalyst, this project will enable upscaling and commercialization with our spin out company and industrial partners.

Who is involved

OrganisationCityCountryRole
Universiteit UtrechtUtrechtNetherlandsCoordinator

Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI