Seminal
The magazine and atlas of EU-funded researchA new publication from the web and AI team at Scott Charnley

Atlas / Netherlands

European Research Council grant · Finished

SPRINT Sputtering Halide Perovskites for Integration in Monolithic Tandem Solar Cells

Coordinator
Universiteit Twente, Netherlands
Runs
1 June 2023 to 30 November 2024
Status
Finished
EU funding
€150k
Total cost
—
Partners
1 organisations in 1 countries
Type
European Research Council grant
Grant agreement
101113313

What the project is doing

In the project's own words, from its summary on CORDIS.

Perovskite-silicon tandem solar cells are one of the most promising new technologies in solar energy research, due to their high efficiencies and use of low-cost materials. One attractive way to make these tandems is to grow the wide band gap perovskite on textured silicon solar cells, forming a monolithic tandem. Record efficiencies of 31.25% have been reported for these monolithic tandems, but still on relatively small area devices (1 cm2).

To bring this technology closer to the market, it is imperative to start focussing on scalability. Specifically, the perovskite top cell needs to be reliably produced with industrially-validated, scalable deposition methods. This deposition method should also allow high deposition rates and direct integration of the perovskite top cell into textured silicon cells. SPRINT will develop sputtering deposition of these perovskites.

Sputtering is a highly industrialized physical vapor deposition (PVD) method that tackles all challenges: high deposition rate, conformal deposition and is scalable. But to date it hasn’t been explored for halide perovskites. SPRINT's goal is to use the knowledge generated in my ERC StG CREATE for halide target fabrication (patent filed) and single target PVD deposition, and apply this to develop a sputtering coating process for inorganic wide band gap perovskites for monolithic integration in tandem devices.

SPRINT will bring an innovative solution to key stakeholders in the PV market. Specifically, PV module manufacturers (such as Oxford PV and Meyer Burger) could implement the process into existing sputtering systems in their R&D labs and later into production lines. Vacuum equipment manufacturers (such as Von Ardenne and Demcon TSST) will benefit from the demand for deposition equipment. This will allow fast-tracking a new generation of PV to the market with > 30% efficiency at a lower price point, strengthening the European PV market.

Topics

Who is involved

OrganisationCityCountryRole
Universiteit TwenteEnschedeNetherlandsCoordinator

Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI