Seminal
The magazine and atlas of EU-funded researchA new publication from the web and AI team at Scott Charnley

Atlas / France

Research and Innovation Action · Running

TENSIS Technology for European Independence in Space Image Sensor

Coordinator
Teledyne E2v Semiconductors SAS, France
Runs
1 January 2025 to 31 December 2027
Status
Running
EU funding
€3.0m
Total cost
—
Partners
5 organisations in 3 countries
Type
Research and Innovation Action
Grant agreement
101190057

What the project is doing

In the project's own words, from its summary on CORDIS.

The objective of the Technology for European iNdependence in Space Image Sensors (TENSIS) project is to develop, manufacture, and validate a scalable, large-area, high-resolution, radiation tolerant, customizable, and affordable, 180nm CMOS detector, with the key technical characteristics of a 24K x 16K format matrix of 400MPixels. The targeted pixel pitch is 3.5µm to keep the overall matrix manufacturable with the proposed X-Fab 0.18µm CMOS Image Sensor process, and with high Full Well Capacity.

Overall pixel electro-optical performances including MTF and spectral features will be enhanced by the design and implementation of specific optical stack in Back Side Illumination configuration, combining RGB&NIR filters with flat microlenses. As a by product of the design of the 24K x 16K detector, a 4K x 4K detector will also be designed and manufactured by Te2v in FSI then BSI configuration. Te2v will package produced dies in PCB package and deliver them to Airbus Defence and Space in Toulouse for detailed functional electro-optical characterization.

Before this characterization test campaign, Airbus will develop dedicated test means including proximity boards both matching with the 24K x 16K and the 4K x 4K detectors, in close cooperation with Tev. A group of 4K x 4K BSI detectors initially electro-optically characterized by Airbus will then be delivered to ALTER, at Séville to be submitted to dedicated environmental tests, including TID, TNID and heavy ions radiation campaigns as well as burn-in and power on/off cycling tests.

Thanks to this test campaign, the 4K x 4K detector die will reach TRL7 by the end of the project . The project will further aim at creating a strategic competitive advantage for the European partners, prime and equipment manufacturers and reduce the dependence on critical technologies and capabilities from outside EU. It will rely on the X-Fab foundry, which is key for the TENSIS project.

Topics

Who is involved

OrganisationCityCountryRole
Teledyne E2v Semiconductors SASSaint EgreveFranceCoordinator
Interuniversitair Micro-Electronica CentrumLeuvenBelgiumParticipant
Alter Technology Tuv Nord SASevillaSpainParticipant
Teledyne Innovaciones Microelectronicas SLSevillaSpainParticipant
Airbus Defence and Space SASToulouse CedexFranceParticipant

Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI