Seminal
The magazine and atlas of EU-funded researchA new publication from the web and AI team at Scott Charnley

Atlas / Italy

European Innovation Council · Running

THREAD Thermite reactions assisting satellite demise

Coordinator
Politecnico Di Milano, Italy
Runs
1 May 2025 to 31 October 2028
Status
Running
EU funding
€2.9m
Total cost
€2.9m
Partners
9 organisations in 4 countries
Type
European Innovation Council
Grant agreement
101186901

What the project is doing

In the project's own words, from its summary on CORDIS.

This project develops a new method to manage the decommissioning of satellites through the use of on-board heat generation systems based on non-explosive thermite charges, called thermite-for-demise (T4D). Thermites are mixtures of metal and metal oxide which can undergo spontaneous exothermic reactions even in vacuum, according to composition and production. Pioneering projects have demonstrated that T4D may be used to damage space components and support their demise during atmospheric reentry.

However, its real world application needs the filling of knowledge gaps and practical problems: (A) the powdered form is not the best way to obtain localized reliable heat release; (B) the expected life cycle in a space mission has never been considered; (C) a strategy for T4D use is not available. The project targets the maturation of T4D technology in three major steps. (1) New thermite-based composite materials granting thermite a structural consistency will be developed and their behavior characterized.

Environmental stress tests will secure their use across satellite lifecycle. (2) With these building blocks, heat-generating shapes and devices will be developed, supported by the experience of a large spacecraft integrator. The heat transfer behavior of thermite-based objects will be modeled and validated under representative reentry conditions, in hypersonic wind tunnel. Results will support the update of system-level reentry simulation tools and the definition of application strategy, further validated on demise test in wind tunnel with hardware of representative or simplified geometry from the selected use-cases, supplied by a space company. (3) All previous outcomes will support a cost-benefit analysis for T4D industrial implementation and its long term evolution.

The results of the project will demonstrate with new experiments and modeling approaches that T4D has the potential to become an engineering standard for the space community.

Topics

Who is involved

OrganisationCityCountryRole
Politecnico Di MilanoMilanoItalyCoordinator
Airbus Defence and Space GmbHTaufkirchenGermanyParticipant
Deutsches Zentrum Fur Luft - Und Raumfahrt eVKolnGermanyParticipant
HTG - Hyperschall Techologie Göttigen GmbHBovendenGermanyParticipant
R.techVerniolleFranceParticipant
Universite Jean MonnetSaint-EtienneFranceParticipant
Agenzia Nazionale per Le Nuove Tecnologie, L'energia E Lo Sviluppo Economico SostenibileRomaItalyParticipant
ReActive Powder Technology SRLMilanoItalyParticipant
Ceiia - Centro De Engenharia E Desenvolvimento (associacao)MatosinhosPortugalParticipant

Source: CORDIS, European Commission. Data of 5 Nov 2026, reused under the Commission's reuse policy. View on CORDIS · Grant DOI